Product and Parts Breakdown for 100-4201-OR

Fixed Pulley PV6 X 68 Fited To Bosch Units VW Type For BU122,BU125 Base Unit

ID OD W 17mm 52mm 17mm Seal Both Sides

ID OD W 17mm 35mm 10mm Seal Both Sides

Voltage Set Point 28 B Circuit Bosch Original Equipment

B+ Post = 8 mm Note: Delta stator application. Features: 6–60A press–fit avalanche diodes

ID OD W 8mm 23mm 14mm Seal Both Sides With 2-Tolerance Rings in Outer Race

B+ Post = 8 mm Features: 12–50A press–fit avalanche diodes (20–24V) Aluminum heat sinks

Replacing 135172 Application Bosch IR/IF Alternators

B+ Post = 8 mm Note: Delta stator application. Features: 6–50A press–fit avalanche diodes

B+ Post = 8 mm Note: Delta stator application. Features: 6–50A press–fit avalanche diodes

B+ Post = 6 mm Note: With trio. Features: 6–25A diodes

Voltage Set Point 14.5V A Circuit With Soft Start Slipring OD : 14 mm

Voltage Set Point 14.5V A Circuit With Soft Start Slipring OD : 14 mm

Voltage Set Point 14.3V A Circuit Slipring OD : 14 mm

Voltage Set Point 14.4V A Circuit Slipring OD : 14 mm

Voltage Set Point 14.5V A Circuit With Soft Start Slipring OD : 14 mm

Voltage Set Point 14.5V A Circuit With Soft Start

Bosch NCB2 Alternator Plug 5 Pin With 300mm Lead

Bosch 0124 Series Tolerance Ring Fits 6003 Bearings Original Equipment

Voltage Set Point 14.8V A Circuit With Soft Start Slipring OD : 14 mm

Voltage Set Point 14.5V A Circuit With Soft Start Slipring OD : 14 mm

Voltage Set Point 14.5V A Circuit Slipring OD : 14 mm

Voltage Set Point 14.3V A Circuit With Soft Start Slipring OD : 14 mm

B+ Post = 8 mm Note: Delta stator application. Features: 6–50A press–fit avalanche diodes

B+ Post = 8 mm Note: Delta stator application. Features: 6–50A press–fit avalanche diodes